AFV+ Programmable AC Source
15 kVA – 2 MVA
High-power cabinet-format programmable AC source spanning the range between bench units and full grid simulators.
Output
| Output voltage | 300VAC L-N, Optional 400V & 600V |
|---|---|
| Output frequency | 45~65Hz, Optional 45~500Hz, 300~840Hz |
| Output current | 2777A max |
| Phase | three |
Input
| phase | 1 or 3 phase |
|---|---|
| voltage | 120/208, 220/380, 277/480 |
| frequency | 50/60 Hz |
| power factor | ≥0.85 (Power Factor Correction) |
Capabilities
- Programmable high-power AC source with measurements
- 15kVA-2MVA power ratings, cabinet chassis with local indication
- Operating efficiency ≥85%; power factor correction ≥0.85
- Optional 400V & 600V output voltage ranges (higher output voltage is subject to de-rating)
- RS232/RS485 interfaces included, optional GPIB/LAN
- Measurements pre-compliance testing and LabView VIs / SCPI supported
What it is bought for
Each of these sets out the bus, the clause and where programmes get caught out.
Where this sits in the range
4 of 5 by ceiling in AC Sources.
Further reading
Every figure on this page is transcribed from AC-Source-Handoutv002.pdf. A build gate re-checks each one against that document and fails the build if it is not there.