EL97xx Series Electronic Loads
150 W – 6,000 W and above
Electronic load series from 150 W to 6,000 W and above, under manual or system control — built for straightforward battery and power-supply test without a rack behind it.
Output
| Output voltage | input rating of 0-500V (sink rating) |
|---|---|
| Phase | dc |
Models
Part numbers in crawlable text — searchable, linkable, and quotable by model.
| Part number | Power | Phase | Input | Max input current |
|---|---|---|---|---|
| EL9712B | 300W | — | — | — |
Capabilities
- Series input rating of 0-500V — the input (sink) rating a buyer sizes on; models with power ratings from 150 to 6,000W
- Loads may be combined to provide greater than 6,000W of load
- 6 modes of operation (CC, CR, CV, CC+CV, CR+CV) with fast rise-times
- Dual range 16-bit resolution measurements
- Fully protected against OP, OC, OV, OT and reverse polarity
- 999 measurements/hour, constant current mode soft-start, dynamic pulsing and programmable duty cycles
- Built-in battery test functions; controllable by PowerStar software suite; USB connection for integration into automated systems
- 2 year warranty; 4 week lead-time
What it is bought for
Each of these sets out the bus, the clause and where programmes get caught out.
Where this sits in the range
1 of 2 by ceiling in Electronic Loads.
Further reading
Every figure on this page is transcribed from EL9712B_Electronic_Load.pdf. A build gate re-checks each one against that document and fails the build if it is not there.